Best Raspberry Pi Network Monitoring Tools (2026)

By Paul Snyman · Published · 9 min read

Short version. "Network monitor" covers five different jobs, and the right Pi tool depends on which one you mean. For a web dashboard of every device on your network, NetAlertX is the most complete free choice. For the lightest tool on an old 32-bit Pi, WatchYourLAN. For an alert on your iPhone when the internet drops or a new device joins, with no dashboard to look after, PingKit Agent, free to run on a 64-bit Pi 4 or 5. For websites and services, Uptime Kuma. Pi-hole is not a monitor at all, but it runs happily beside any of them.

A Raspberry Pi is a good home for a network monitor because it stays on, draws little power and sits on your own network. The tools below all run on one. They are not interchangeable: some watch which devices are on your network, some watch whether the internet is up, some graph latency for months, and one measures bandwidth by host.

Full disclosure: I build PingKit Agent, one of the ten, so weigh my view of it accordingly. Every fact about the other nine comes from the project's own README, Docker Hub listing or website, and the dates are the day I checked them, 2026-11-11. Check each project's own pages before you decide; they change.

Pick by Job

If you wantLook at
A web dashboard of every device, with plugins and historyNetAlertX
A light device list and new-device alerts on an old 32-bit PiWatchYourLAN, or Pi.Alert
Your iPhone told when the internet goes down, a new device joins or a device goes offlinePingKit Agent
New-device alerts in the Fing app you already pay forFing Agent
To know when a website, port or service goes downUptime Kuma
Latency and packet loss graphs over monthsSmokePing
Which device is using the bandwidthntopng
Your internet speed over timeSpeedtest Tracker
Ads and trackers blocked for every devicePi-hole (not a monitor; it runs beside one)

The Ten at a Glance

Checked 2026-11-11. "32-bit Pi" means the project publishes a 32-bit ARM build (its Docker images, or its README's list); "not stated" means I could not find it on the project's own pages, not that it is missing. Last push is the GitHub repository's, or the Docker image's for Fing Agent.

ToolLicence32-bit PiAlerts to your phoneInternet outage logHome AssistantLast push
NetAlertXGPL-3.0Yes (armv6, armv7)Through Apprise (80+ services), Pushover, ntfy, PushsaferA plugin (Internet check)An add-on in a community repository; data into Home Assistant2026-11-08
WatchYourLANMITYes (arm_v5, arm_v6, arm_v7)Through ShoutrrrNoNot stated2025-09-10
Pi.Alert (leiweibau)GPL-3.0Not statedPushover, Pushsafer, ntfy, Telegram, emailNot statedThrough its API2026-10-16
Fing AgentProprietary, paid planNo (amd64 and arm64 images)The Fing appListed on Fing's pricing page; plan not statedOfficial integration (local polling)2026-10-15 (image 1.2.0)
PingKit AgentClosed agent, free to runNo (64-bit Pi 4 or 5)The iPhone app with Guardian; free to ntfy, Telegram, Discord, Pushover, a webhook or apprise-apiYes, with where the fault looks to beA Home Assistant app, entities over MQTTNew with PingKit 4.0
Uptime KumaMITYes (armv7)Telegram, Discord, Pushover, email and 90+ servicesFor the targets you addNot stated2026-11-11
SmokePingGPL-2.0Not statedNot statedLatency and loss graphs to the targets you setNot stated2026-08-10
ntopngGPL-3.0Not stated (Raspberry Pi packages)Not statedNot statedNot stated2026-11-10
Speedtest TrackerMITNo (amd64 and arm64 image)Notification channels, when performance drops below a thresholdFrom its scheduled testsNot stated2026-10-26
Pi-holeEUPLYes (armv6, armv7)Not its jobNot its jobNot stated2026-11-07

The Tools, One by One

NetAlertX

The most complete free option for watching the devices on your network. It scans your network, keeps a history of every device, and sends notifications through Apprise to more than 80 services, or natively to Pushover, ntfy and Pushsafer. Plugins add an internet check, a speed test and an MQTT publisher, and its README says it can feed device changes into Home Assistant, with an add-on in a community repository. Everything has a browser interface; there is no native phone app.

Its sample Docker run uses host networking and adds the NET_RAW, NET_ADMIN and NET_BIND_SERVICE capabilities. Its discovery also imports from Pi-hole, DHCP leases, a UniFi controller or an SNMP router. If you want open source, a full web interface and plugins, this is the one to start with. Side by side: PingKit Agent vs NetAlertX.

WatchYourLAN

A small, single-purpose tool: it keeps a list of the hosts on your network, sends a notification when a new one appears (through Shoutrrr), and keeps each host's online and offline history. It can send its data to InfluxDB2 or Prometheus for a Grafana dashboard. It needs host networking and serves its web page on port 8840. Its README lists 32-bit ARM builds down to arm_v5, which makes it the natural pick for an old Pi. The repository's last push was 2025-09-10. Moving off it, and who should stay: WatchYourLAN alternative with iPhone alerts.

Pi.Alert

leiweibau's Pi.Alert was originally designed for the Raspberry Pi and installs with a script on Debian-based systems. A backend run by cron every five minutes scans the network, tells you when an unknown device appears or a known one goes offline, and also watches hosts and web services you add. Notifications go to the web interface, email, Pushover, Pushsafer, ntfy or Telegram, and its API works with Home Assistant. GPL-3.0; the repository's last push was 2026-10-16.

Fing Agent

Fing Agent runs on a Raspberry Pi, Linux servers, NAS devices through their container managers, and Docker, and links to the Fing app to alert your phone when new devices join. It needs a paid Fing subscription: on fing.com, Premium is $8.99 a month or $79.99 a year and allows 2 agents; in Fing's iPhone app, Premium is $7.99 a month or $69.99 a year (both checked 2026-11-11). Its Docker images are amd64 and arm64, so it needs a 64-bit system. Home Assistant has an official Fing integration that polls a Fing Agent, Fingbox or Fing Desktop locally. Fing can also block devices and set access schedules, which none of the others here can. A dated, row-by-row comparison is on PingKit Agent vs Fing Agent.

PingKit Agent

My entry, built for one job: tell you when something on your own network changes, without a dashboard you have to remember to open. It runs on a 64-bit Raspberry Pi 4 or 5 (the install script refuses a 32-bit system), and also in Docker on a Linux computer or NAS, or as a Home Assistant app. It tells you when the internet goes down and comes back, when a new device joins after a first day of learning, and, if you turn it on, when a device goes offline. While the internet is down it checks your router, the first hop past it and DNS, and says which looks broken.

Running it is free, with or without an iPhone. Its own read-only pages, alerts to your own ntfy, Telegram, Discord, Pushover, webhook or apprise-api, and Home Assistant entities over MQTT are free. PingKit on your iPhone adds push for every alert, the outage log and the dashboard with PingKit Guardian: $2.99 a month or $24.99 a year on iPhone, with a 1-week free trial. The agent itself is closed source; the compose files, the install script, the Home Assistant app and the documentation are public, and its local API, MQTT and webhooks are open interfaces. It uses host networking and adds no capabilities. We have not measured it on a Raspberry Pi yet; in a 24-hour test on a Linux virtual machine it peaked at about 55 MB of memory. The Raspberry Pi guide has the one install command; the Docker and NAS page covers the rest.

Uptime Kuma

The standard self-hosted answer to "is my service up?". It checks HTTP(s), TCP ports, ping, DNS records, Docker containers and more, draws status pages and ping charts, and notifies Telegram, Discord, Pushover, email and more than 90 other services. MIT; the repository's last push was 2026-11-11. It watches the targets you give it, not every device that joins, so it complements a device monitor rather than replacing one. See PingKit vs Uptime Kuma.

SmokePing

A latency logging, graphing and alerting system written in Perl on RRDtool, from Tobias Oetiker and Niko Tyni. Point it at a few targets and months later you have the graphs that show when your line gets worse. It is a good answer for "is my connection getting worse at night?".

ntopng

A web-based network traffic monitor, GPL-3.0, with binary packages for Raspberry Pi and Debian ARM. It answers a different question from the rest of this list: what is using the bandwidth, and where is it going.

Speedtest Tracker

Runs scheduled speed tests and keeps download, upload, ping and packet loss as a history, with notifications when performance drops below a threshold you set. MIT; the image is built by LinuxServer.io for amd64 and arm64. Good if your complaint is speed rather than drops.

Pi-hole

Network-wide ad blocking, a DNS sinkhole, EUPL-licensed. It is not a network monitor, but many Pis that could run one already run it, so it is worth saying that it runs beside one. PingKit Agent can share the Pi with it; see PingKit vs Pi-hole.

Which Pi Do You Need?

Honest Limits of PingKit Agent

Frequently Asked Questions

What is the best Raspberry Pi network monitor?

It depends on the job. For a web dashboard of every device on your network, NetAlertX. For the lightest tool on an old 32-bit Pi, WatchYourLAN. For an alert on your iPhone when the internet goes down or a new device joins, PingKit Agent, free to run on a 64-bit Pi 4 or 5. For websites and services, Uptime Kuma.

Can a 32-bit Raspberry Pi run a network monitor?

Yes. WatchYourLAN, NetAlertX and Uptime Kuma publish 32-bit ARM builds, and so does Pi-hole. PingKit Agent, Fing Agent and Speedtest Tracker's image need a 64-bit system.

Can I run a network monitor on the same Pi as Pi-hole?

Usually, yes. Pi-hole answers DNS and a monitor watches devices, so the two do different jobs. PingKit Agent uses ports 7474 and 7475 and can share the Pi with Pi-hole.

Do I need to buy a Raspberry Pi?

No, if you already leave something on. Most of these tools run in Docker on a NAS or a Linux computer, PingKit Agent also runs as a Home Assistant app, and on a Mac that stays awake the PingKit Mac Agent does the same job.

Is PingKit Agent open source?

No. The agent is closed source and free to run. Its compose files, Raspberry Pi install script, Home Assistant app and documentation are public, and its local API, MQTT and webhooks are open interfaces. If open source matters most, NetAlertX, WatchYourLAN and Pi.Alert are.

Your network, on your iPhone

Run PingKit Agent free on a 64-bit Pi 4 or 5, then pair it with PingKit on your iPhone. Alerts on the iPhone need Guardian, with a 1-week free trial.

Get PingKit for iPhone

Related Articles